By Kurnia · Published November 10, 2026 · Version 1 · 20 min read
The ear and the eye
how the ear hears, hair cells and noise damage, balance, how the eye sees, dark adaptation and glare, ultraviolet light and welding, and chemical splashes to the eye
A hospital laundry technician goes home with ringing ears and muffled hearing after a whole day near a washer-extractor, while a linen worker who watched a trolley being welded without protection wakes up that night with painful, watery eyes that feel gritty. This chapter explains, from the biological side, how the ear converts sound into nerve signals, why hair cells damaged by noise do not grow back, how the balance organ works, how the eye forms an image and converts light into signals, dark adaptation and afterimages following bright light, ultraviolet from the welding arc, and what happens when a chemical splashes into the eye. Noise dose, hearing protection, laser safety, the welding arc, and eye rinsing are referred to the K3 and physics chapters. The chapter gives no diagnosis or medication advice.
A hospital laundry technician spends a shift replacing the bearings of a washer-extractor while the machine next to it keeps spinning. The technician takes off their hearing protection because they want to hear the sound of the worn bearing. That afternoon, on the way home, their ears ring and people’s voices sound as if they are coming from behind glass. In the same workshop, a linen worker stands for a few minutes watching a coworker weld a trolley without a face shield. The linen worker feels nothing at the time, but at nine in the evening their eyes are painful, watery, sensitive to glare, and feel as if sand has got into them.
The next morning the supervisor asks: whether the ringing will go away by itself and the ears will “get used to it,” why the linen worker’s eyes only hurt six hours later, and what has to be done. The answers are in the sections on hair cells and on ultraviolet, and in Example 6.
Scope
This chapter covers the ear and the eye from the biological side: how both convert sound and light into nerve signals, and what happens when noise, intense light, ultraviolet, or chemicals damage them. Sound, intensity, and decibels are discussed in Chapter 14 · Physics on mechanical waves and sound; noise dose, control, and hearing protection in Chapter 7 · Safety on noise; light and lenses in Chapter 20 · Physics; laser safety in Chapter 32 · Physics on the quantum atom, spectra, and lasers; the welding arc in Chapter 13 · Materials on the physics and chemistry of the welding arc; eye rinsing and first aid for chemicals in Chapter 6 · Safety on chemicals in technician work; and PPE in Chapter 5 · Safety.
This chapter gives no diagnosis or medication advice. Hearing, balance, and eye complaints are assessed by an occupational health officer, the company doctor, or a health facility.
From sound waves to the inner ear
Sound is a mechanical pressure wave that travels through a medium such as air or water, so there is no sound in a vacuum. At sea level at 20 °C, sound travels in air at about 343 meters per second. Frequency is heard as pitch and measured in hertz (Hz), while amplitude is heard as loudness and measured in decibels (dB); a person speaking normally does so at about 60 dB. The relationship between wavelength (m), propagation speed (m/s), and frequency (Hz) is
and it applies to sound in air at a constant temperature. The human ear encodes frequencies from 20 to 20,000 Hz, and the ability to hear high pitches declines with age.
The external ear consists of the auricle, the ear canal, and the tympanic membrane, the eardrum, which vibrates when sound waves strike it. The middle ear is a cavity containing three small bones, the malleus, incus, and stapes, which pass the vibration of the eardrum on to the inner ear; these bones also concentrate the force and amplify the sound. The middle ear is connected to the pharynx by the Eustachian tube, which is usually closed but opens when swallowing or yawning so that the air pressure on both sides of the eardrum is equal.
The inner ear is a set of canals within the temporal bone consisting of the cochlea for hearing and the vestibule for balance. The signals from both travel together to the brainstem through the vestibulocochlear nerve. The stapes is attached to the oval window at the base of the cochlea, so the vibration of the auditory ossicles moves the fluid inside the cochlea at the same frequency as the sound. Because the two organs lie side by side, balance disorders such as vertigo and hearing problems can both point to a problem in the inner ear.
The cochlea and hair cells
Inside the cochlea, the basilar membrane stretches along the coiled canal. The fluid wave moves this membrane at a particular place according to its frequency: high frequencies move the part near the base of the cochlea, near the oval window, and low frequencies move the part near its tip. This model is called place theory: pitch is determined by the location of the stimulated cells along the membrane.
On top of the basilar membrane lies the organ of Corti, which contains the hair cells, mechanoreceptor cells whose tips carry rows of stereocilia, hairlike projections arranged from tallest to shortest and linked to one another by protein fibers. When the basilar membrane moves, the tectorial membrane above it shears the stereocilia. When the stereocilia bend toward the tallest one, the protein links tighten and open ion channels, the hair cell depolarizes, and a signal is sent to the nerve fibers; when they bend the other way, the channels close. Action potentials and synapses are described in Chapter 33 on nerves and the brain.
Hair cells are few in number. The inner hair cells are arranged in a single row and number about 3,500; these are the main auditory receptors, and about 90 percent of the afferent neurons carry information from them. The outer hair cells are arranged in three or four rows, number about 12,000, and serve to fine-tune the response of the cochlea. Their sensitivity to pitch is very fine: the difference in response frequency between adjacent inner hair cells is about 0.2 percent, whereas two adjacent piano strings differ by about 6 percent. Loudness is determined by how many hair cells at one place are stimulated.
Noise and hair cells that do not grow back
Noise-induced hearing loss is hearing loss caused by harmful sound, either a very loud impulse sound or repeated exposure to 85 A-weighted decibels (dBA) or more over a long time. Most of this loss occurs because hair cells are damaged and then die, and unlike the hair cells of birds and amphibians, human hair cells do not grow back.
The damage usually develops slowly and without pain, so people often do not notice it at first. Loud sound can also cause tinnitus, a ringing, buzzing, or roaring sound in the ears or head, in one or both ears. Sometimes exposure to an impulse sound or continuous loud sound causes a temporary hearing loss that disappears 16 to 48 hours later. This temporary loss is a warning that the hair cells have been overloaded, not a sign that the ear is getting used to it. Noise-induced hearing loss is entirely preventable.
These data come from a US health agency. In Indonesia, Peraturan Menteri Ketenagakerjaan (Minister of Manpower Regulation) No. 5 of 2018 on Keselamatan dan Kesehatan Kerja Lingkungan Kerja (occupational safety and health of the work environment) regulates the physical factors of the work environment, including noise; its threshold values, the daily dose, and how to choose hearing protection are discussed in Chapter 7 · Safety. The decibel scale is used here only to compare intensities:
where is the sound intensity level (dB), the intensity (W/m²), and the reference intensity at the threshold of hearing. Every increase of 10 dB means ten times the intensity, and every increase of about 3 dB means twice the intensity. This formula does not state how loud a sound is perceived to be and does not calculate dose; both are in Chapter 14 · Physics and Chapter 7 · Safety.
Balance: the vestibule and the semicircular canals
Equilibrium is the sense that monitors head position, head movement, and body movement. Its receptors are also hair cells with stereocilia, but they are located in the vestibule. The utricle and saccule sense head position and linear acceleration. The stereocilia of their hair cells are embedded in a gel layer topped by calcium carbonate crystals, otoliths, which make the layer top-heavy. When the head tilts, the layer shifts in the direction of gravity and bends the stereocilia. The utricle contains about 30,000 hair cells and the saccule about 16,000.
The three semicircular canals sense rotational movement of the head. One canal is horizontal and two are vertical, and at the base of each is an ampulla containing hair cells whose stereocilia are embedded in the cupula. When the head rotates, the fluid in the canal lags behind, so the cupula is pushed opposite to the direction of head movement. These canals are sensitive to changes in speed, not to speed itself: a person moving in a straight line at constant speed with eyes closed does not feel movement, but sudden acceleration or braking stimulates the receptors.
The vestibule also works together with the eye muscles. The vestibulo-ocular reflex is the reflex that turns the eyes opposite to the rotation of the head so that the image stays still on the retina. This is why a technician can still read a gauge while turning their head. If the vestibule gives information that does not match the eyes, for example during spinning dizziness, a person can lose their balance, and that is dangerous on a ladder or scaffold; the hazards of work at height are in Chapter 10 · Safety.
How the eye forms an image and converts light
The eye is protected in the orbit of the skull. The eyelids and eyelashes keep out particles, and the conjunctiva, a thin membrane on the inner surface of the eyelids, covers the white of the eye. Tears from the lacrimal gland flow across the surface of the eyeball and conjunctiva to the inner corner of the eye, washing away foreign particles.
The wall of the eyeball consists of three layers. The outer layer consists of the white sclera and the clear cornea at the front, which admits light and, together with the lens, focuses it on the retina. The middle layer contains the choroid, which is rich in blood vessels, the ciliary body, which changes the shape of the lens, and the iris, which constricts the pupil in bright light and dilates it in dim light. The inner layer is the retina, the neural tissue where light is converted into signals. The physics of lenses and refraction is discussed in Chapter 20 · Physics on light.
The retina has two types of photoreceptor. Rods are very sensitive to light, numerous at the periphery of the retina, and used for dim-light and night vision without color. Cones are less sensitive, concentrated in the center of the retina, and used for daylight and color vision. In the fovea, a small depression in the center of the retina, there are only photoreceptors, with no blood vessels or supporting cells, so visual acuity is highest there; toward the periphery, several photoreceptors converge on one ganglion cell, up to a ratio of 50 to 1. The axons of the ganglion cells gather at the optic disc and leave as the optic nerve, so there are no photoreceptors at that spot and a blind spot is formed.
The pigment in the photoreceptors contains retinal, a molecule related to vitamin A. When a photon strikes it, retinal changes shape from cis to trans, and this change starts the signal. The rod pigment, rhodopsin, is most sensitive at a wavelength of 498 nm; the three cone pigments are most sensitive at about 564, 534, and 420 nm. Visible light is electromagnetic radiation with wavelengths of about 380 to 720 nm; longer wavelengths are infrared and shorter ones ultraviolet.
Dark adaptation, glare, and afterimages
Retinal that has changed to the trans form cannot respond to light again until it is returned to the cis form through a series of enzymatic reactions; this state is called bleaching. In sunlight, rhodopsin is constantly bleached while the cones do the work. In a dark room, there is not enough light for the cones, so vision depends entirely on the rods and consists only of shades of gray. Dark adaptation is the gradual increase in the eye’s sensitivity after moving from a bright place to a dark one. The sensitivity of the rod pathway improves noticeably after 5 to 10 minutes in the dark, and the dark adaptation curve levels off only after about 40 minutes.
After a very bright flash of light, many pigments are bleached at once, so the retina sends information as if it were seeing the opposite, and a negative afterimage usually appears. That is why a technician who has just looked at a very bright work light or a welding arc and then turns to a dim panel cannot read its numbers for a while.
To see a dim object in the dark, it is easier to use peripheral vision than to look straight at it, because rods are more numerous at the periphery of the retina. The iris constricts the pupil in bright light to reduce the light entering. Glare in this chapter means light that is much brighter than its surroundings in the field of view. Glare makes the pupil constrict and bleaches pigments, so dimmer objects nearby are hard to see; lighting design to reduce glare is in Chapter 33 · Electrical & Control on lighting installation.
Ultraviolet and the welding arc
The welding arc emits ultraviolet (about 200 to 400 nm), visible light (400 to 700 nm), and infrared (700 to 1,400 nm). Ultraviolet C and almost all ultraviolet B are absorbed by the cornea, while ultraviolet A passes through the cornea and is absorbed by the lens. The energy of a single photon increases as its wavelength becomes shorter:
where is the photon energy in electronvolts (eV), the Planck constant, the speed of light, and the wavelength in nanometers. The second form of the formula applies only to those units. Ultraviolet photons carry more energy than photons of visible light; the physics is described in Chapter 21 · Physics on electromagnetic radiation and Chapter 29 · Physics on light as particles.
Arc eye (welder’s flash) is inflammation of the front surface of the eye caused by ultraviolet from the welding arc. Exposure to intense ultraviolet for only a few seconds can cause it, and its symptoms, namely pain, watery eyes, redness, a gritty feeling, and sensitivity to light, are often felt only several hours after the exposure. Ultraviolet reflected from metal, walls, and ceilings is just as dangerous, and long-term exposure can cause cataracts in some people. This delay of several hours explains the opening case: the linen worker felt nothing while watching, and only that night did the surface of their eyes become inflamed.
Eye and face protection for welding, filter lens shade, and welding curtains are discussed in Chapter 13 · Materials and Chapter 5 · Safety. Ultraviolet lamps for air disinfection in hospitals, which also emit ultraviolet C, are discussed in Chapter 10 on bioaerosols; the biological principle is the same.
Chemical splashes to the eye
The front surface of the eye is exposed living tissue: the clear cornea and the thin conjunctiva are in direct contact with the air and with any liquid that splashes. Its only defenses are the blinking eyelids, the eyelashes, and the tears that rinse the surface, as well as the enzyme lysozyme in tears, discussed in Chapter 24 on innate body defenses. These defenses are designed for dust and microbes, not for concentrated cleaning liquids. The cornea also has to remain clear so that light reaches the retina, so damage there immediately impairs vision.
Cleaning agents in laundries and kitchens are often strongly acidic or strongly alkaline. The data sheets for chlorine bleach and oxygen bleach in Chapter 6 · Safety list serious eye damage as a main hazard. A splashed substance keeps acting as long as it remains in contact, including what is trapped under the eyelids. For this reason the first aid is to rinse immediately with plenty of water, including under the eyelids, for at least 15 minutes, and then go to a doctor, as in Chapter 6 · Safety. Rubbing the eye grinds the substance into the cornea and does not help. Chemical burns of the skin are discussed in Chapter 41 on the skin and chemicals.
Worked example
The figures in the examples below are practice figures unless their source is stated.
Example 1: wavelength of sound in the cochlea. With m/s, a 20 Hz sound has m, a 1,000 Hz sound m, and a 20,000 Hz sound m, or about 1.7 cm. All three are still received by a cochlea only a few centimeters long, because the cochlea separates frequencies by the location of the vibration of the basilar membrane, not by holding one whole wavelength. A 20,000 Hz sound moves the base of the cochlea and a 20 Hz sound its tip.
Example 2: a washer-extractor compared with conversation. Normal conversation is about 60 dB. Next to a washer-extractor during extraction, the meter reads 94 dB. The intensity ratio is times. Compared with the 85 dBA limit from the US health agency, times. The daily dose and the permitted exposure time are calculated by the method in Chapter 7 · Safety, not with this ratio.
Example 3: how finely the cochlea distinguishes pitch. The range of 20 to 20,000 Hz equals , nearly 10 octaves. If two adjacent inner hair cells differ by 0.2 percent, one octave (a doubling of frequency) is covered in steps. For piano strings that differ by about 6 percent, , roughly 12 steps per octave. The inner hair cells, only about 3,500 of them, have to cover the whole range, so losing even a small fraction of them already cuts out a frequency band.
Example 4: photon energy of ultraviolet and visible light. With , a 254 nm photon from an ultraviolet C lamp carries eV, a 365 nm ultraviolet A photon carries eV, and a 534 nm photon, the sensitivity peak of one of the cones, carries eV. The 254 nm photon carries times the energy of that green photon. The 254 nm photon belongs to ultraviolet C, which is absorbed by the cornea, while 365 nm belongs to ultraviolet A, which reaches the lens.
Example 5: entering a dark pump room. A technician leaves a bright yard at 10:00 and enters an underground pump room with no lights on. The job is reading valve labels, scheduled to start at 10:03. The sensitivity of the rods improves noticeably only after 5 to 10 minutes, that is between 10:05 and 10:10, and the curve levels off only at about 40 minutes, that is around 10:40. At 10:03 the technician’s eyes have not yet adapted, and rod vision does not distinguish the colors of the labels. The answer is to switch on the room lighting or bring a flashlight, not to wait for the eyes to get used to the dark.
Example 6: the decision in the opening case. The technician worked 6 hours next to a 94 dB machine, that is 9 dB above 85 dBA, without hearing protection, and then their ears rang and their hearing was muffled. A temporary loss like this can disappear within 16 to 48 hours, but it is a sign that the hair cells have been overloaded, and dead hair cells do not grow back. The supervisor records the exposure, asks the technician to wear hearing protection on the next shift, and reports it to the occupational health officer; if the ringing or muffled hearing is still present the next day, the technician is examined. The linen worker watched the welding at 15:00 and began to feel pain at 21:00, a delay of hours, consistent with the pattern of arc eye symptoms appearing several hours later. The linen worker is examined promptly by a doctor or a health facility, does not rub their eyes, and does not use eye drops without a doctor’s instructions. The welding area is fitted with curtains and protection as in Chapter 13 · Materials.
Stop conditions
Stop work and hand over to the person named when:
- A chemical splashes into the eye; rinse immediately at an eyewash station for at least 15 minutes as in Chapter 6 · Safety, then a health professional takes over; the supervisor brings the material data sheet for that substance.
- The eyes are painful, watery, red, feel gritty, or are sensitive to glare several hours after being near welding or an ultraviolet lamp; the worker is examined by a doctor that day, and welding in the open area is stopped until curtains and protection are installed.
- The ears ring or hearing is muffled after working near noisy machines; the worker leaves the noisy area, wears hearing protection, and reports to the occupational health officer, who determines whether a hearing test is needed.
- Hearing drops suddenly, or the ear hurts or discharges fluid after an explosion or a loud impulse sound; the worker is examined by a doctor that day.
- The worker has spinning dizziness or loses their balance; the worker comes down from the ladder or scaffold, does not operate machinery, and the supervisor reports to the occupational health officer.
- A foreign body or metal fragment has entered the eye and does not come out with a water rinse; the eye is not rubbed or picked at, and the worker is taken to a health professional.
- Hearing protection, eye protection, or a welding curtain is not available for work that requires it; the work is postponed until the supervisor provides it, as in Chapter 5 · Safety.
Common misinterpretations
Guess what’s wrong first, then open the explanation.
Common misconception
The ears gradually get used to noise.
Why is it wrong?
What is lost is hair cells, and human hair cells do not grow back. Noise feels less disturbing because hearing has already declined, not because the ears have become tougher.
Common misconception
The ringing will be gone tomorrow, so there is no damage.
Why is it wrong?
A temporary loss can recover within 16 to 48 hours, but repeated exposure accumulates damage without pain.
Common misconception
It did not hurt while watching the welding, so the eyes are safe.
Why is it wrong?
Arc eye symptoms are often felt only several hours after exposure, and a few seconds of intense ultraviolet is enough to cause it.
Common misconception
Ordinary sunglasses are enough for looking at a welding arc.
Why is it wrong?
The ultraviolet and visible light of a welding arc require protection made for welding, as in Chapter 13 · Materials and Chapter 5 · Safety. Dark lenses not designed for this also make the pupils dilate.
Common misconception
An eye hit by a chemical only needs rubbing and a few drops of water.
Why is it wrong?
Rubbing grinds the substance into the cornea. The first aid is to rinse with plenty of water for at least 15 minutes and then go to a doctor.
Common misconception
In a dark room, wait a moment and the eyes will adjust.
Why is it wrong?
Rod sensitivity improves only after 5 to 10 minutes and levels off only at about 40 minutes, and rod vision does not distinguish colors. Work in dark rooms uses lighting.
Links to other chapters
Chapter 14 · Physics on mechanical waves and sound gives the physics of decibels, and Chapter 7 · Safety on noise gives the dose and hearing protection. Chapter 20 · Physics on light, Chapter 21 · Physics on electromagnetic radiation, and Chapter 29 · Physics on light as particles give the physics of light and photons; Chapter 32 · Physics discusses laser safety, Chapter 13 · Materials the welding arc, and Chapter 33 · Electrical & Control lighting. Chapter 6 · Safety on chemicals gives first aid for the eyes, Chapter 5 · Safety PPE, and Chapter 41 on the skin and chemicals discusses chemical burns. Chapter 33 on nerves and the brain explains nerve signals from receptors, Chapter 24 on innate body defenses discusses tears, and Chapter 10 · Safety discusses work at height, which depends on balance.
Exercises and worked solutions
Try to answer first, then open the worked solution.
What is the wavelength of a 2,000 Hz sound in air at 20 °C?
Check my answer
See the worked solution
m, about 17 cm. This tone moves a part of the basilar membrane between the base and the tip of the cochlea, because the location of the vibration is determined by frequency.
A dryer produces 100 dB near its door. How many times greater is its intensity than 85 dB?
Check my answer
See the worked solution
times. An increase of 15 dB does not sound that large, but the energy reaching the hair cells really is about 32 times greater, and the dose is calculated by the method in Chapter 7 · Safety.
Calculate the energy of a 300 nm photon and a 600 nm photon, and their ratio.
Check my answer
See the worked solution
eV and eV, so the ratio is 2 times because the wavelength is half. The 300 nm photon belongs to ultraviolet B, almost all of which is absorbed by the cornea, while the 600 nm photon is visible light that is passed on to the retina.
A technician says their hearing “recovers” every Monday after the weekend off, so the noise in the machine room does no damage. What is wrong with that conclusion?
Check my answer
See the worked solution
Recovery within one to two days indicates a temporary loss, not a sign that the ears are immune. Dead hair cells do not grow back, and damage accumulates without pain, so it is a hearing test by the occupational health officer that assesses it.
Why is a dim gauge in a dark room easier to see if the technician glances slightly to the side of it?
Check my answer
See the worked solution
Rods, which are sensitive to dim light, are more numerous at the periphery of the retina, while the fovea in the center is full of less sensitive cones. Glancing to the side places the image of the gauge on the rods, although acuity is lower and color cannot be seen.
Bleach splashes into a kitchen worker’s eye. A coworker suggests waiting to see whether the stinging goes away. What is the correct response?
Check my answer
See the worked solution
The substance keeps acting as long as it remains on the cornea and conjunctiva, and the eye’s only defenses are blinking and tears. The worker immediately rinses with plenty of water for at least 15 minutes under the eyelids and is then taken to a doctor with the material data sheet, as in Chapter 6 · Safety.
References
External sources
- OpenStax: Anatomy and Physiology 2eopenstax.org
- OpenStax: Biology 2eopenstax.org
- Noise-Induced Hearing Lossnidcd.nih.gov
- Welding - Radiation and the Effects On Eyes and Skinccohs.gc.ca
- Light and Dark Adaptationncbi.nlm.nih.gov
- Peraturan Menteri Ketenagakerjaan Nomor 5 Tahun 2018 tentang Keselamatan dan Kesehatan Kerja Lingkungan Kerjajdih.kemnaker.go.id
Revision history
| Date | Version | Change |
|---|---|---|
| November 10, 2026 | 1 | First published |
How to cite
Kurnia (2026). The ear and the eye: how the ear hears, hair cells and noise damage, balance, how the eye sees, dark adaptation and glare, ultraviolet light and welding, and chemical splashes to the eye. ARSTEMA Academy. Revised November 10, 2026. arstema.com/en/academy/konsep/telinga-dan-mata-cara-telinga-mendengar-sel-rambut-dan-kerusakan-akibat-bising-keseimbangan-cara-mata-melihat-adaptasi-gelap-dan-silau-cahaya-ultraviolet-dan-las-serta-percikan-bahan-kimia-ke-mata
Self-check · 3 questions
Check your understanding before moving on
Write your answer in your own words, then compare it with the worked solution from this chapter’s exercises. The system doesn’t judge open answers as right or wrong; you decide which parts you’ve understood.
What is the wavelength of a 2,000 Hz sound in air at 20 °C?
A dryer produces 100 dB near its door. How many times greater is its intensity than 85 dB?
Calculate the energy of a 300 nm photon and a 600 nm photon, and their ratio.
Nearby chapters
Reading order by shelf: Biology & Microbiology · Chapter 40.
Reading order by shelf: Biology & Microbiology · Chapter 38.
Another chapter in Biology & Microbiology.