Skip to content

Search ARSTEMA

Type a chapter, term, symptom, or tool.

    Biology & Microbiology · Chapter 41Applied

    By Kurnia · Published November 10, 2026 · Version 1 · 19 min read

    Skin and chemicals

    skin layers and the protective function, absorption of chemicals through the skin, contact dermatitis from wet work, acid and alkali chemical burns, thermal burns, and hand skin care

    A member of the dishwashing staff in a hotel kitchen works for hours with wet hands until the backs of their hands are red and cracked, and then one night dishwasher detergent concentrate splashes onto their arm and is only wiped off. This chapter explains the layers of the skin and how the stratum corneum keeps out water and chemicals, the absorption of chemicals through the skin with a simple diffusion model, irritant and allergic contact dermatitis, the limits of wet work, acid and alkali chemical burns together with the pH scale, the degrees of thermal burns, and the care and checking of hand skin. The chapter gives no diagnosis, medication advice, or first aid steps that replace the safety data sheet and Chapter 6 · Safety; skin complaints are referred to the company doctor.

    Section you’re reading: Chapter opening

    In a hotel kitchen, a member of the dishwashing staff scrapes food scraps in the sink, soaks pots, and loads dishwasher racks for almost the whole shift. Part of the time they wear rubber gloves and part of the time they do not, and they wash their hands every time they move to the clean food area. After two weeks, the backs of their hands and the skin between their fingers are red, dry, and itchy, and then they crack. One night, while changing a jerry can of dishwasher detergent concentrate, the liquid splashes onto their forearm. They only wipe it off with a cloth and carry on working; the next morning the skin at that spot has blistered and looks larger than the splash. These two events come from different mechanisms: wet work that wears away the skin barrier, and a strong alkali that destroys tissue. This chapter explains both, and Example 6 returns to this case.

    Scope

    This chapter covers the skin from the biological side: its layers and protective function, the absorption of chemicals, contact dermatitis from wet work, chemical burns, and the degrees of burns. Skin infections from spas, pools, and linen are in Chapter 21; burns from heat, steam, and hot surfaces are in Chapter 8 · Safety; labels, safety data sheets, and first aid for chemicals are in Chapter 6 · Safety; choosing gloves and their breakthrough time is in Chapter 5 · Safety; alkaline cleaning chemistry is in Chapter 6 · Laundry; pH is in Chapter 8 · Chemistry; diffusion and Fick’s law are in Chapter 11 · Materials; the innate defense of the skin against microbes is in Chapter 24; and splashes into the eye are in Chapter 39 on the ears and eyes.

    This chapter gives no diagnosis, medication advice, or first aid steps that replace the safety data sheet. Skin complaints are examined by a doctor or the company doctor.

    Skin layers

    The integumentary system is the skin together with its accessory structures, namely the hair, nails, sweat glands, and oil glands, which together protect the body. The skin consists of two main layers. The epidermis on the outside is made of tightly packed epithelial cells and has no blood vessels. The dermis beneath it is dense connective tissue containing blood vessels, nerves, hair follicles, and sweat glands. Below the dermis lies the hypodermis, loose connective tissue and fat that stores energy, retains body heat, and cushions impacts.

    The epidermis of thin skin has four layers of cells. From the inside out they are the stratum basale, the stratum spinosum, the stratum granulosum, and the stratum corneum. The thick skin of the palms and soles has a fifth layer, the stratum lucidum, between the stratum granulosum and the stratum corneum. The stratum basale contains stem cells that divide continually; the new cells are pushed upward, make keratin, and then die. Keratin is a fibrous protein inside the cells that makes the skin, hair, and nails tough and water-resistant.

    The dermis gives the skin strength and elasticity. Collagen fibers give tensile strength and bind water, while elastin fibers allow the skin to stretch. Its papillary layer, which projects into the epidermis, is rich in small blood vessels, phagocytic cells, and touch receptors. Because the epidermis has no blood vessels, a wound that bleeds has already reached the dermis.

    The protective function: the stratum corneum and the water barrier

    The stratum corneum is the outermost layer of the epidermis, made of 15 to 30 layers of dead cells packed with keratin. This dry layer keeps out microbes, prevents the tissue beneath from losing water, and protects the softer layers from friction. Its cells are continually shed and replaced from below; the whole layer is renewed in about 4 weeks.

    The water resistance of the skin does not come from keratin alone. Cells in the stratum spinosum and stratum granulosum release water-repelling glycolipids onto the cell surfaces, and this lipid layer, together with keratin, forms a barrier that prevents body fluids from escaping. The skin is also the first line of defense against friction, microbes, and harmful chemicals, and sweat contains dermcidin, which is antimicrobial. Because the barrier is made of lipids and dead cells, anything that dissolves lipids or softens the stratum corneum weakens it. Constant water, detergents, and solvents do both.

    The skin also adapts to friction. When one spot is rubbed continually, the stem cells in the stratum basale divide more often and the skin thickens into a callus to protect the tissue beneath. This thickening protects against friction, but it does not make the skin resistant to chemicals.

    Absorption of chemicals through the skin

    Chemicals can enter the body through the skin and affect other organs. The stratum corneum is the main factor that determines the rate of absorption. How much of a substance is absorbed depends on the integrity of the skin, the site on the body, the properties of the chemical, its concentration on the skin surface, and the duration of contact. Pesticides and organic solvents are among the substances that can be absorbed this way. For this reason some chemicals are given a skin notation, a mark on a list of chemicals indicating that contact with the skin can damage organs or trigger an immune response.

    The movement of a substance through the stratum corneum can be approximated as diffusion, as in Chapter 11 · Materials on diffusion. In the simplest model, the rate of absorption per area of skin is proportional to the concentration of the substance at the surface:

    J=Kp C,m=Kp C A tJ = K_p\,C, \qquad m = K_p\,C\,A\,t

    where JJ is the flux of the substance through the skin (mg/(cm²·h)), KpK_p the skin permeability coefficient for that substance (cm/h), CC the concentration of the substance in the liquid on the skin (mg/cm³), AA the area of wet skin (cm²), tt the duration of contact (h), and mm the mass of substance absorbed (mg). This model assumes a constant surface concentration, intact skin, and a flow that has reached steady state. Values of KpK_p differ greatly between substances and rise when the stratum corneum is damaged; the model is used to compare situations, not to calculate a person’s dose.

    The formula makes three things readable. Doubling the area of wet skin or the duration of contact doubles the amount of substance absorbed. Cracked or wounded skin has lost part of its stratum corneum, so KpK_p rises. Clothing or gloves wet with a chemical keep the substance in contact, so tt increases even though the worker feels protected. In Indonesia, threshold limit values for chemical factors in workplace air are set in Permenaker (Minister of Manpower Regulation) No. 5 of 2018 on occupational safety and health in the work environment. An airborne concentration that meets the threshold limit value says nothing about the substance entering through the skin; the skin route is read from the safety data sheet, as in Chapter 6 · Safety.

    Irritant and allergic contact dermatitis

    Irritant contact dermatitis is inflammation of the skin caused by a chemical that damages the skin directly, usually only at the site of contact. The cause can be brief contact with a strong acid, a strong alkali, or an oxidizing or reducing agent, or repeated contact with mild irritants such as water and detergent. Allergic contact dermatitis is an immune reaction to a chemical absorbed by the skin; this reaction occurs only in workers who are already sensitized to that allergen. Common allergens include metals, epoxy and acrylic resins, and rubber additives. The two types often look the same, so telling them apart usually requires a patch test by a doctor.

    According to NIOSH, contact dermatitis accounts for 90 to 95 percent of cases of occupational skin disease in the United States. That figure is United States data, not Indonesian; there, most occupational skin disease comes from contact with substances, not from infection.

    The early signs of dermatitis are dry, itchy, or red skin, and dryness and cracking must not be ignored. Treatment is far more successful when dermatitis is recognized early, so the worker reports it to their supervisor and is examined by the occupational health service. Because allergic dermatitis appears only in workers who are already sensitized, complaints that arise after using rubber gloves or a new material are reported, not dealt with by switching from one cream to another on one’s own.

    Wet work and impermeable gloves

    Wet work is work that exposes the skin to liquids, impermeable protective clothing, or wet objects for more than two hours per shift, or that involves washing the hands more than 20 times per shift. This definition is used in the guidance of the Australian occupational safety agency, which also notes that workers often do not realize how many times they wash their hands each day. Impermeable gloves count, because heat and sweat collect inside them and the skin stays wet even though it does not touch water from outside.

    The mechanism follows from the previous section. Constant water and detergent soften the stratum corneum and dissolve the barrier lipids, so the skin loses water, becomes dry, and then cracks. Cracked skin lets the next irritant in more easily, forming a cycle: the more damaged the barrier, the greater the absorption and inflammation. Dishwashing staff, pot washers, laundry staff who handle wet linen, cleaners, and nurses who wash their hands often can belong to this group. Hand hygiene must not be reduced to protect the skin; what is managed is the method and the care, as in Chapter 11 on standard precautions.

    The British occupational safety agency uses the order avoid, protect, check. Work is arranged so that unprotected hands do not touch hazardous substances or wet work, for example by using tools or machines. When contact cannot be avoided, suitable gloves are worn, hands are washed and dried properly, and moisturizer is used as often as possible, especially at the end of the day, to replace the natural oils that maintain the skin barrier. The choice of glove type is covered in Chapter 5 · Safety.

    Acid and alkali chemical burns

    A burn occurs when the skin is damaged by intense heat, radiation, electricity, or chemicals. Dead skin cells can cause a large loss of fluid, and burned skin is highly vulnerable to infection because its protective layer is gone. Chemicals cause damage because proteins lose their shape when the temperature, pH, or chemicals around them change; this process is called denaturation, and when it is irreversible, the protein loses its function.

    The strength of acids and bases is read from the pH:

    pH=−log⁡10[H3O+],pOH=−log⁡10[OH−],pH+pOH=14\text{pH} = -\log_{10}\left[\text{H}_3\text{O}^{+}\right], \qquad \text{pOH} = -\log_{10}\left[\text{OH}^{-}\right], \qquad \text{pH} + \text{pOH} = 14

    where [H3O+]\left[\text{H}_3\text{O}^{+}\right] and [OH−]\left[\text{OH}^{-}\right] are the concentrations of hydronium and hydroxide ions (mol/L). The relation pH+pOH=14\text{pH} + \text{pOH} = 14 holds at 25 °C; a neutral solution has a pH of 7 at that temperature, acids are below 7, and bases above 7. A difference of one pH unit means the ion concentration differs by a factor of 10. For a strong base diluted with water, a 10-fold dilution lowers the pH by about one unit as long as the solution is still far more basic than neutral; the details are in Chapter 8 · Chemistry on solutions and pH.

    Acids and bases damage tissue in different ways. Acids coagulate proteins and form a hard eschar that can limit the spread of damage, while bases liquefy tissue so that the substance keeps penetrating deeper. Bases usually cause greater tissue damage than acids. Examples of acids at home and at work are battery acid and toilet bowl cleaner, and examples of bases are paint stripper, lime, dishwasher detergent powder, and lye. Because a base keeps penetrating as long as it remains in the tissue, the damage can grow after the splash has happened. Chapter 6 · Laundry on cleaning chemistry notes that alkalis saponify the fats of the skin so that it feels slippery, and that slippery feeling is a sign of a chemical injury in progress, not a sign that the substance is gone.

    The concentrate in the jerry can is far more dangerous than the working solution in the machine, because its hydroxide ion concentration is much higher, as calculated in Example 3. Neutralizing a splash with another acid or base is not a step that is used, because neutralization releases heat on the skin, as discussed in Chapter 12 · Chemistry on thermochemistry. The steps of rinsing, removing contaminated clothing, and seeking help follow the safety data sheet and Chapter 6 · Safety.

    Degrees of burns and thermal burns

    Burns are classified by their depth. A first-degree burn affects only the epidermis; the skin is painful and swollen and usually heals on its own within a few days, like mild sunburn. A second-degree burn affects the epidermis and part of the dermis, causes swelling and painful blisters, and heals within a few weeks if the site is kept clean. A third-degree burn goes through the whole epidermis and dermis, destroys nerve endings, and can look white, red, or black; it requires medical treatment. A fourth-degree burn affects muscle and bone. Third- and fourth-degree burns are often less painful precisely because their nerve endings are destroyed.

    The extent of a burn also determines whether special treatment is needed. The method used is called the rule of nines, which assigns specific body regions percentages of body surface area that are multiples of nine. Assessing the extent and depth of a burn is the work of a health professional, not of a worker or supervisor.

    This classification of degrees applies to both thermal and chemical burns. The difference is that a heat source stops causing injury as soon as contact ends and the skin cools, while a chemical keeps reacting as long as it remains on the skin. The temperatures of water, steam, and hot surfaces that injure the skin, and their control, are discussed in Chapter 8 · Safety.

    Hand skin care and regular checks

    The skin repairs itself, but slowly. Because the stratum corneum is renewed in about four weeks, a barrier damaged by wet work needs weeks to recover, and that recovery stops if the same exposure continues every day. Wounds deeper than the epidermis generally heal with scar tissue, skin rich in collagen whose structure differs from the original skin.

    From the workplace side, hand skin care follows the order avoid, protect, check: the time hands are wet is reduced with tools or machines, suitable gloves are worn, hands are washed and then dried properly, moisturizer is used during breaks and at the end of the shift, and hands are checked regularly for signs of dryness, itching, and redness. From the definition of wet work, impermeable gloves should be worn only as long as needed and changed when the inside is wet. Workplaces with wet work or substances with a skin notation should include skin checks in the occupational health surveillance managed by the company doctor.

    Worked example

    The numbers in the examples below are practice numbers unless their source is stated.

    Example 1: area and duration of contact with a solvent. A technician cleans grease with a solvent solution at a concentration of 50 mg/cm³ without gloves, and its permeability coefficient for intact skin is assumed to be 0.002 cm/h. If only both palms, about 200 cm², are wet for 0.5 h, m=0.002×50×200×0.5=10m = 0.002 \times 50 \times 200 \times 0.5 = 10 mg. If the hands and forearms, 800 cm², are wet for 2 h, m=0.002×50×800×2=160m = 0.002 \times 50 \times 800 \times 2 = 160 mg, which is 16 times as much, because the area rises 4 times and the time rises 4 times.

    Example 2: cracked skin and wet gloves. Suppose that on cracked skin the permeability coefficient of the same substance rises 5 times to 0.01 cm/h. For both palms for 0.5 h, m=0.01×50×200×0.5=50m = 0.01 \times 50 \times 200 \times 0.5 = 50 mg, five times that of intact skin. If the solvent gets inside the gloves and is held there for 3 h, m=0.01×50×200×3=300m = 0.01 \times 50 \times 200 \times 3 = 300 mg. Gloves that have let in a chemical extend the contact time, so the result is 300 mg, six times that of hands without gloves rinsed after 0.5 h.

    Example 3: concentrate and working solution. A dishwasher detergent concentrate has a pH of 13 and the working solution in the machine a pH of 11, both at 25 °C. The concentrate has a pOH =14−13=1= 14 - 13 = 1, so [OH−]=10−1=0.1\left[\text{OH}^{-}\right] = 10^{-1} = 0.1 mol/L; the working solution has a pOH of 3 and [OH−]=10−3=0.001\left[\text{OH}^{-}\right] = 10^{-3} = 0.001 mol/L. The ratio is 0.1/0.001=1000.1/0.001 = 100 times. For a strong base, this is equivalent to a dilution of about 100 times, so a splash from the jerry can is far more damaging than a splash from inside the machine.

    Example 4: counting wet work. In one shift, a dishwashing staff member soaks their hands in the sink 4 times for 25 minutes each, wears impermeable gloves for 50 minutes to scrape pots, and washes their hands 24 times. The wet time is 4×25+50=1504 \times 25 + 50 = 150 minutes, or 2.5 hours, above two hours, and the hand washing is 24 times, above 20 times. Both wet work limits are exceeded. If the soaking is replaced with a soaking machine and long-handled brushes so that the hands are wet only 2 times for 20 minutes plus 50 minutes in gloves, the time is 2×20+50=902 \times 20 + 50 = 90 minutes, below two hours; the number of hand washes stays the same, so skin care and checks are still needed.

    Example 5: recovery time of the stratum corneum. The stratum corneum consists of 15 to 30 layers of cells and is renewed in about 4 weeks, that is, 28 days. On average, new layers grow at 28/30≈0.9328/30 \approx 0.93 to 28/15≈1.928/15 \approx 1.9 days per cell layer. A damaged barrier does not recover in one or two days off; if exposure continues every day, the damaged layers keep being replaced by layers that are also damaged.

    Example 6: the decision in the opening case. The dishwashing staff member exceeds the wet work limits as in Example 4, and their hands are dry, itchy, red, and cracked, which are the early signs of dermatitis. They report to the supervisor and are examined by the company doctor; whether it is irritant or allergic is decided by the doctor. The splash of concentrate at pH 13 has a hydroxide ion concentration 100 times that of the working solution, and the base keeps penetrating the tissue, so wiping it with a cloth is not enough. Rinsing and the next steps follow the safety data sheet and Chapter 6 · Safety, the incident is reported that same day, and blisters in the morning mean that they are examined by a health professional. The supervisor reviews how the jerry cans are changed, for example with a pump or a closed coupling, together with the occupational safety and health (K3) officer.

    Stop conditions

    Stop the work and hand it over to the supervisor, the K3 officer, the company doctor, or a health professional if:

    1. A corrosive substance, for example detergent concentrate, oven cleaner, lye, or acid descaler, gets on the skin or in the eyes; the worker stops, rinses according to the safety data sheet and Chapter 6 · Safety, and reports it that same day.
    2. Skin exposed to a chemical blisters, turns white or dark, goes numb, or becomes more painful after a few hours; the worker is examined by a health professional that day.
    3. The hands are dry, red, itchy, or cracked for more than a few days in wet work; the worker reports to the company doctor, and the supervisor reviews the duration of wet work together with the K3 officer.
    4. A rash appears after using rubber gloves, resin, or a new material; use of that material is stopped for that worker until a doctor has assessed it.
    5. A chemical gets inside the gloves or soaks the clothing; the worker stops, removes them, and cleans the skin before continuing with fresh equipment, as in Chapter 5 · Safety.
    6. The worker is asked to neutralize a splash with another substance, to treat a burn or rash on their own, or to use a substance with a skin notation without a safety data sheet.

    Common misinterpretations

    Guess what’s wrong first, then open the explanation.

    Common misconception

    The skin is a wall, so chemicals do not get in if there is no wound.

    Why is it wrong?

    The stratum corneum slows absorption but does not stop it; solvents and pesticides can enter through intact skin, and the amount rises with the area and duration of contact.

    Common misconception

    Water and soap are harmless to the skin.

    Why is it wrong?

    Repeated contact with mild irritants such as water and detergent is among the causes of irritant contact dermatitis, especially when it exceeds the wet work limits.

    Common misconception

    An alkali splash that does not sting is safe once wiped off.

    Why is it wrong?

    Bases liquefy tissue and keep penetrating deeper, and a slippery feeling on the skin is a sign of a chemical injury in progress.

    Common misconception

    Gloves always protect the skin.

    Why is it wrong?

    Impermeable gloves worn for a long time make the skin wet with sweat and count as wet work, and a chemical that gets inside them is held there longer.

    Common misconception

    A burn that does not hurt must be minor.

    Why is it wrong?

    Third-degree burns are often less painful because their nerve endings are destroyed, yet these burns require medical treatment.

    Chapter 24 explains the skin as an innate defense against microbes, and Chapter 21 skin infections from spas, pools, and linen. Chapter 6 · Laundry on cleaning chemistry and Chapter 8 · Chemistry on pH explain the substances that touch the skin, Chapter 11 · Materials diffusion, and Chapter 12 · Chemistry the heat of neutralization and dilution. Chapter 6 · Safety governs safety data sheets and first aid, Chapter 5 · Safety gloves, Chapter 8 · Safety thermal and steam burns, Chapter 11 hand hygiene, and Chapter 21 · Laundry laundry K3. In the human body series, Chapter 38 discusses sweat and Chapter 39 splashes into the eye.

    Exercises and worked solutions

    Try to answer first, then open the worked solution.

    1. A cleaning solution at pH 12 is diluted to pH 10. By what factor does its hydroxide ion concentration fall, and why does this matter for the skin?

      Check my answer
      See the worked solution

      A drop of 2 pH units means the pOH rises from 2 to 4, so [OH−]\left[\text{OH}^{-}\right] falls by 102=10010^{2} = 100 times. A hydroxide ion concentration 100 times lower reduces the damaging power of the base, but a dilute solution is still an irritant when contact is repeated, like water and detergent in wet work.

    2. Using the model m=Kp C A tm = K_p\,C\,A\,t, what mass of substance is absorbed if Kp=0.001K_p = 0.001 cm/h, the concentration is 20 mg/cm³, the area is 300 cm², and the duration of contact is 1.5 h?

      Check my answer
      See the worked solution

      m=0.001×20×300×1.5=9m = 0.001 \times 20 \times 300 \times 1.5 = 9 mg. This number is only for comparing situations; if the skin is cracked or the contact time is longer, the value rises proportionally.

    3. A member of the laundry staff handles wet linen 6 times for 20 minutes each and wears impermeable gloves for 50 minutes per shift. Is this wet work?

      Check my answer
      See the worked solution

      The wet time is 6×20+50=1706 \times 20 + 50 = 170 minutes, about 2.8 hours, above two hours, so it counts as wet work. The work is reviewed to reduce the wet time, and the skin of the hands is cared for and checked regularly.

    4. Someone has stayed in the sun too long; their skin is painful and small blisters appear. Which layer of the skin is damaged?

      Check my answer
      See the worked solution

      Blisters indicate a second-degree burn, which affects the epidermis and part of the dermis. A first-degree burn affects only the epidermis and does not blister.

    5. Why must a worker not conclude that a chemical burn is minor just because it does not hurt?

      Check my answer
      See the worked solution

      A deep burn destroys nerve endings, so it feels less painful even though the damage is severe. A base also keeps penetrating after contact, so the assessment of depth is left to a health professional.

    6. After several months of wearing rubber gloves, a cleaner develops a rash on the backs of the hands. What type of dermatitis is possible, and who determines it?

      Check my answer
      See the worked solution

      A rash after months of wearing rubber gloves can be allergic contact dermatitis to rubber additives, but it can also be irritant because the skin is wet with sweat. The two often look the same, so a doctor determines it, for example with a patch test.

    References

    External sources

    • Anatomy and Physiology 2eopenstax.org
    • Chemistry 2eopenstax.org
    • Skin Exposures and Effectscdc.gov
    • guidanceonpreventionofdermatitiscausedbywetwork 2005 pdfsafeworkaustralia.gov.au
    • Work-related contact dermatitishse.gov.uk
    • Chemical Burnhealthlinkbc.ca
    • Chemical Burnsncbi.nlm.nih.gov
    • Peraturan Menteri Ketenagakerjaan Nomor 5 Tahun 2018 tentang Keselamatan dan Kesehatan Kerja Lingkungan Kerjajdih.kemnaker.go.id
    • Biology 2eopenstax.org

    Revision history

    DateVersionChange
    November 10, 20261First published

    How to cite

    Kurnia (2026). Skin and chemicals: skin layers and the protective function, absorption of chemicals through the skin, contact dermatitis from wet work, acid and alkali chemical burns, thermal burns, and hand skin care. ARSTEMA Academy. Revised November 10, 2026. arstema.com/en/academy/konsep/kulit-dan-bahan-kimia-lapisan-kulit-dan-fungsi-pelindung-penyerapan-bahan-kimia-lewat-kulit-dermatitis-kontak-akibat-kerja-basah-luka-bakar-kimia-asam-dan-basa-luka-bakar-panas-dan-perawatan-kulit-tangan

    Self-check · 3 questions

    Check your understanding before moving on

    Write your answer in your own words, then compare it with the worked solution from this chapter’s exercises. The system doesn’t judge open answers as right or wrong; you decide which parts you’ve understood.

    0/3rated
    1

    A cleaning solution at pH 12 is diluted to pH 10. By what factor does its hydroxide ion concentration fall, and why does this matter for the skin?

    2

    Using the model m=Kp C A tm = K_p\,C\,A\,t, what mass of substance is absorbed if Kp=0.001K_p = 0.001 cm/h, the concentration is 20 mg/cm³, the area is 300 cm², and the duration of contact is 1.5 h?

    3

    A member of the laundry staff handles wet linen 6 times for 20 minutes each and wears impermeable gloves for 50 minutes per shift. Is this wet work?

    Self-assessment progress0%

    Nearby chapters