Skip to content

Search ARSTEMA

Type a chapter, term, symptom, or tool.

    Chemistry · Chapter 29Applied

    By Kurnia · Published November 15, 2026 · Version 1 · 19 min read

    Glass and mirror cleaners

    glycol ethers and surfactants, evaporation and streaks, cloths and tools, coated surfaces, and handling and storage

    The glass doors of a hotel lobby show wiping streaks every afternoon, and the more glass cleaner is sprayed on, the clearer the streaks become. This chapter covers glass and mirror cleaners: their contents according to one manufacturer’s safety data sheet (a liquid at pH 6 to 8 with a single glycol ether at 1 to 5 percent), how surfactants and solvents wet the glass and lift an oily film, why nonvolatile material stays behind as streaks, microfiber and cotton cloths, cloth folding, bottles, and squeegees, and mirrors, coated glass, films, and plastics whose cleaning instructions come from their makers. The final section covers dilution, handling, and storage, including the prohibition on mixing glass cleaner with chlorine bleach.

    Section you’re reading: Chapter opening

    Every afternoon the sun comes in through the west windows of a hotel lobby, and at that hour the glass doors and glass partitions of the lobby show wiping streaks that are not visible in the morning. The housekeeping attendants respond by spraying on more glass cleaner and wiping harder, but the streaks only increase. On the guest room floors, the supervisor finds two other things. The bottom edges of several long-installed bathroom mirrors have turned black, and the spray bottles on the trolley carry no label, so no one knows the dilution of what is in them.

    The three findings have different explanations. The wiping streaks come from material left behind after the liquid evaporates. The blackened mirrors concern the layers behind the glass, which wiping cannot repair. The unlabeled bottles are a matter of chemical handling.

    Scope

    This chapter covers liquid glass cleaners for glass and mirrors indoors, within safe reach from the floor: their contents, how the liquid wets and evaporates, the cause of streaks, cloths and tools, coated surfaces, and dilution, handling, and storage. This chapter is learning material, not a work instruction. The product data come from one manufacturer’s safety data sheet for one product of this group, so other products are read from their own label and data sheet. Guidance from the United States and Britain is given as data from those countries.

    How to read a data sheet is in Chapter 26 on reading safety data sheets for cleaning products, surfactants and wetting in Chapter 21 on surfactants, colloids, and emulsions, vapor pressure in Chapter 5 on intermolecular forces and the properties of matter, glycols and ethers in Chapter 20 on organic chemistry for technicians, and hardness in Chapter 16 on solubility and precipitation. Glass types, cracks, and safety film are in Chapter 50 · Buildings & Facilities on building glass and windows. All-purpose cleaners are covered in Chapter 27 and Chapter 28, acid bathroom cleaners in Chapter 30, and disinfectants in Chapter 4 · Biology & Microbiology.

    Cleaning glass from outside the building or at height follows Chapter 47 · Buildings & Facilities on gondolas and facade access and Chapter 10 · Safety on work at height, and is not the work described here. Replacing a mirror whose layers are damaged, opening an insulating glass unit, and removing scratches or etching from glass are the work of a glazing contractor. Housekeeping attendants and building technicians clean, inspect, record, and report.

    What is in a glass cleaner

    A glass cleaner is a water-based cleaning liquid for glass and mirrors that is designed to dry without leaving a visible film. According to the manufacturer’s safety data sheet for one product of this group, the glass cleaner is a liquid with a pH of 6 to 8 for the undiluted product and a relative density of 0.980 to 1.010. Its composition table lists one ingredient, namely dipropylene glycol ethers with CAS number 29911-27-1 at a concentration of 1 to 5 percent, and other ingredients are not itemized. Its dilution rate is written as 1 : 5 to 10. The data sheet was issued on August 22, 2024 and is valid until August 21, 2029. A density almost the same as that of water is consistent with a water-based product.

    Glycol ethers are a group of organic solvents whose molecules contain an ether group and an alcohol group together, so they dissolve well in both water and oil; the Indonesian text of Chapter 20 on organic chemistry for technicians writes the term as eter glikol. The Safer Chemical Ingredients List of EPA, the United States environmental agency, lists the CAS number above as dipropylene glycol propyl ether in the solvents class with a yellow triangle. That mark means the chemical meets the criteria for its functional class but still has some issues in its hazard profile, so it is not of low concern for all human health and environmental endpoints.

    EPA notes that glycol ethers are used as solvents and as an ingredient in cleaning compounds, liquid soaps, and cosmetics. Its hazard summary is written for three glycol ethers derived from ethylene glycol, not for the ingredient above; at lower exposure levels that summary records conjunctivitis, upper respiratory tract irritation, headache, and nausea. That record is not simply transferred to dipropylene glycol propyl ether, but it is reason enough to work with good ventilation and not to overspray.

    Other glass cleaners can contain ammonia. NPS, the United States national park service, notes that most common household glass cleaners contain ammonia. The contents of the product in hand are read from its label and data sheet, and a glass cleaner of any kind is never mixed with chlorine bleach: HSE notes that products containing bleach mixed with ammonia or acidic cleaners give off harmful gases.

    Wetting the glass: surface tension, surfactants, and solvents

    Surface tension is the energy required to increase the surface area of a liquid. At 25 °C the surface tension of water is 71.99 mN/m, far above that of ethanol at 21.97 mN/m, because the hydrogen bonds between water molecules are strong. Water spreads out on clean glass because the attraction between water and glass is greater than the attraction between water molecules, but it forms drops on waxed surfaces and many plastics. Glass covered by a thin oily film from fingers behaves like a waxed surface: the water beads up, then dries as spots.

    A surfactant is a substance whose molecules have a nonpolar end that is attracted to oil and an end that is attracted to water. Such molecules place themselves between the dirt and the water, so the dirt becomes suspended and is easily lifted away. Surfactants also lower the surface tension, so the solution spreads as a thin, even layer, as explained in Chapter 21 on surfactants, colloids, and emulsions.

    Glycol ethers work in a closely related way. A well-known example is 2-butoxyethanol, a glycol ether whose molecule is amphiphilic: its polar and nonpolar ends are useful for emulsifying oil into small droplets. In the data sheet of the product above there is no surfactant in the composition table, and that document does not make it possible to know whether the product contains a surfactant at a concentration that is not listed. What can be said from the way these products work: a glass cleaner is made with little active material, because every nonvolatile ingredient has a chance of staying behind on the glass.

    Evaporation and streaks

    Vapor pressure is the pressure exerted by the vapor of a liquid when that vapor is in equilibrium with its liquid at a given temperature. A liquid with weak intermolecular forces evaporates more easily and has a higher vapor pressure; at 20 °C the vapor pressure of methanol is 11.9 kPa and that of butanol is 0.56 kPa. The vapor pressure of every liquid rises as the temperature rises. The full account is in Chapter 5 on intermolecular forces and the properties of matter.

    A streak is an uneven residue layer that is visible as a line or a haze after the cleaning liquid has dried. Water and solvent evaporate, whereas the material that does not evaporate stays behind: surfactant, dirt that has dissolved but was not lifted by the cloth, and minerals from hard dilution water, which is covered in Chapter 16 on solubility and precipitation. The amount of residue can be estimated with a simple model:

    ms=c×mcm_s = c \times m_c

    where msm_s is the mass of residue per unit area (g/m²), cc is the mass fraction of nonvolatile material in the liquid, and mcm_c is the mass of liquid left per unit area after wiping (g/m²). This model assumes that all the liquid left behind dries in place. This model does not describe the unevenness of the layer, although that unevenness is exactly what makes the residue visible.

    The model explains the opening case. Spraying more raises mcm_c, and a solution made stronger than the stated rate raises cc, so both add to the residue. A cloth that is already saturated or dirty no longer lifts the liquid and only moves it around. Glass that is hot or in the sun evaporates the liquid before it can be wiped, because vapor pressure rises with temperature. A thin residue layer becomes visible only when light arrives at a low angle and is scattered by the uneven parts, as in the afternoon in that lobby; the properties of light are covered in Chapter 20 · Physics on light.

    Cloths and tools

    The environmental cleaning guidance of CDC, the United States health agency, was written for healthcare facilities, but its way of using cloths applies generally. A microfiber cloth is a cloth made of very fine synthetic fibers; it is often preferred over cotton because it absorbs more dirt. Microfiber can be damaged by high pH, is not compatible with some disinfectants, especially chlorine-based ones, and is laundered separately from cotton cloths. Glass cloths are therefore not laundered together with cloths that have been used with bleach.

    The cloth is folded in half and then in half again until it is about the size of a hand, which gives eight sides, and those sides are used in turn. The work proceeds from cleaner areas to dirtier ones and from top to bottom, so that dirt does not fall onto areas already cleaned, and in a fixed order so that no area is missed. The cloth is changed when all its sides have been used, and a cloth is not dipped back into the solution container.

    For carrying the solution, the same guidance chooses containers that are clean, dry, appropriately sized, labeled, and dated. Squeeze bottles are preferred over spray bottles for applying the solution directly to the cloth before the cloth touches the surface, and cloths are color-coded by area, for example one color specifically for toilet areas. For glass cleaner, wetting the cloth and not the glass also reduces the spray mist that is breathed in and the liquid that runs down to the frame; HSE notes that some cleaning substances can cause breathing problems if oversprayed or used without adequate ventilation.

    A squeegee is a rubber blade on a handle that is pulled across the glass surface to lift the liquid before it dries. This tool lowers mcm_c in the model above further than a cloth does. Its rubber blade is wiped with a cloth after every pull, and the corners and edges of the glass that the blade cannot reach are dried with a cloth. A nicked blade leaves lines of liquid and is replaced.

    Coated surfaces: mirrors, coated glass, films, and plastics

    A mirror is glass with layers on its back. A United States government glazing specification for mirrors requires one surface of the glass to be coated with silver, then with protective copper, then with a mirror backing paint that protects that silver and copper. From the front those layers are protected by the glass, and from the back by the paint; the cut edge is where the three layers end. Because those layers are exposed at the edge, liquid is not left to run down and pool at the bottom edge and the frame; this is reasoning from the layer structure, not a quotation from a standard. An edge that has already blackened does not recover by wiping; that mirror is recorded for replacement.

    In an insulating glass unit, the same specification places the low-emissivity coating on the No. 2 or No. 3 surface, that is, a surface facing the cavity between the two panes. A coating there is not touched by the cloth, and fog inside the cavity is not dirt that can be cleaned off, as covered in Chapter 50 · Buildings & Facilities on building glass and windows. For reflective glass, that specification requires the reflective coating to be protected from contamination during construction work, and plastic sheet is cleaned in accordance with its manufacturer’s instructions.

    Safety film, heat-control film, anti-fog coatings on mirrors, and acrylic sheet are plastics or thin coatings, and their resistance to solvents cannot be guessed from their appearance; solvent attack on plastics is covered in Chapter 22 on polymers and elastomers. The working rule is the same for all of them: cleaning instructions are requested from the maker or the installer, a new product is first tried in a corner that is out of sight, and stiff brushes, scouring pads, and scraper blades are not used. For historic glass and painted glass, NPS recommends water alone first, then a nonionic detergent if water is not enough, and products with a neutral pH; acidic, caustic, or abrasive cleaners are not used because they can damage glass, and hydrofluoric-acid cleaners cause irreversible damage.

    Dilution, handling, and storage

    The rate of 1 : 5 to 10 in the data sheet of the product above does not explain whether the second number is the parts of water added or the parts of the whole solution. Its meaning is read from the label or queried with the supplier, and Examples 1 and 2 show the calculation for one reading. HSE asks that the concentrated liquid always be added to the water, that cleaning substances not be transferred into food or drink containers, that spray bottles and other containers be clearly marked with their contents, and that cleaning substances never be mixed.

    The data sheet of that product gives a storage temperature of 10 to 50 °C. HSE asks that cleaning substances be stored as their manufacturers advise, away from heat, sunlight, foodstuffs, and members of the public, especially children, in containers that have lids and are clearly labeled. A housekeeping trolley left in a corridor meets that requirement only if its bottles are labeled and cannot be taken by guests.

    A glass cleaner with a neutral pH is still a workplace chemical. HSE asks that eye protection be worn when cleaning at eye level or above, that rubber gloves be checked for holes and tears, and that cleaning substances be used in well-ventilated areas. If a substance splashes onto the skin or into the eyes, the area is washed with plenty of water, and medical advice is sought if irritation persists. Hands that are often wet are at risk of dermatitis, which is covered in Chapter 41 · Biology & Microbiology on the skin and chemicals.

    Household health supplies (Indonesian perbekalan kesehatan rumah tangga, PKRT) are devices, materials, or mixtures of materials for upkeep and care that affect human health and are intended for use in households and public facilities. Permenkes (Minister of Health Regulation) 5/2026 on Perbekalan Kesehatan (health supplies) requires the holder of the marketing authorization to provide labeling that carries information on safety, benefit, instructions for use, and/or other information in line with the laws and regulations, and that information must be objective, complete, and not misleading. The annex of the regulation it revoked, Permenkes 62/2017, listed glass cleaners as one PKRT subcategory. As of November 2026 the list of categories under the new rule could not be confirmed, so the status of a product is asked of the supplier together with its marketing authorization number.

    Worked example

    The figures in the examples below are practice figures, unless their origin is stated. The ratio 1 : n is read as one part of product plus n parts of water; that reading is first matched against the label.

    Example 1: filling a 500 mL bottle. At a rate of 1 : 5, a 500 mL bottle holds 500/6=83.3500/6 = 83.3 mL of product and 500−83.3=416.7500 - 83.3 = 416.7 mL of water. At a rate of 1 : 10, it holds 500/11=45.5500/11 = 45.5 mL of product and 500−45.5=454.5500 - 45.5 = 454.5 mL of water. The water goes in first, then the product, and the bottle is labeled with the product name, the rate, and the date.

    Example 2: glycol ether concentration in the use dilution. The concentrated product contains 1 to 5 percent glycol ether. At a rate of 1 : 5 the concentration becomes 1/6=0.171/6 = 0.17 to 5/6=0.835/6 = 0.83 percent, and at a rate of 1 : 10 it becomes 1/11=0.091/11 = 0.09 to 5/11=0.455/11 = 0.45 percent. A solution made twice as strong as the stated rate does not clean twice as well, but it leaves twice as much residue.

    Example 3: mass of a jerry can and number of bottles. A 5 L jerry can with a relative density of 0.980 to 1.010 has a mass of 5×0.980=4.905 \times 0.980 = 4.90 kg to 5×1.010=5.055 \times 1.010 = 5.05 kg, not including the container. At a rate of 1 : 10 one 500 mL bottle uses 45.5 mL of product, so one jerry can is enough for 5,000/45.5=1105{,}000/45.5 = 110 bottles. At a rate of 1 : 5 the number is 5,000/83.3=605{,}000/83.3 = 60 bottles.

    Example 4: residue left on the glass. The use dilution contains 0.3 percent nonvolatile material, and 8 g of solution is sprayed onto each square meter. If it is not wiped, the residue is ms=0.003×8=0.024m_s = 0.003 \times 8 = 0.024 g/m², that is, 24 mg/m². If the cloth lifts 90 percent of the liquid, what remains is 0.1×24=2.40.1 \times 24 = 2.4 mg/m². Spraying twice as much with the same cloth doubles that figure, and a saturated cloth lowers the share that is lifted.

    Example 5: glass area and number of cloths. One room has a mirror of 0.9 m by 1.2 m and a shower enclosure glass door of 0.8 m by 2.0 m that is cleaned on both sides. The area is 0.9×1.2=1.080.9 \times 1.2 = 1.08 m² plus 2×0.8×2.0=3.22 \times 0.8 \times 2.0 = 3.2 m², so 4.28 m² per room and 24×4.28=102.724 \times 4.28 = 102.7 m² for 24 rooms. If one folded side is used for 2 m², one cloth with eight sides is enough for 16 m², so the number needed is 102.7/16=6.4102.7/16 = 6.4, rounded up to 7 cloths. With 8 g of solution per square meter, the requirement is 102.7×8=822102.7 \times 8 = 822 g, about two 500 mL bottles.

    Example 6: reading two sets of liquid data. The vapor pressure of methanol at 20 °C is 11.9 kPa and that of butanol is 0.56 kPa, a ratio of 11.9/0.56=2111.9/0.56 = 21 times. Both are alcohols, and the vapor pressure of the larger molecule is far lower. The surface tension of water is 71.99 mN/m and that of ethanol is 21.97 mN/m, a ratio of 71.99/21.97=3.371.99/21.97 = 3.3 times. The two ratios show two properties that determine how a liquid behaves on glass: how easily the liquid spreads and how fast the liquid evaporates.

    Stop conditions

    1. A spray bottle or glass cleaner container has no label, or its contents are unknown: do not use it and do not smell it to guess what it is; hand it to the supervisor.
    2. There is a request to add chlorine bleach, an acidic cleaner, or any other product to the glass cleaner: do not mix them; ask the supervisor and the supplier for a written procedure.
    3. A pane or mirror is cracked, its edge is chipped, or a mirror is loose from the wall: do not press on it or wipe it; put up a barrier and hand over to the building technician or a glazing contractor in line with Chapter 50 · Buildings & Facilities on building glass and windows.
    4. The outer side of the glass cannot be reached from inside within safe reach: do not lean out or stand on the sill; the work follows Chapter 10 · Safety on work at height or Chapter 47 · Buildings & Facilities on gondolas and facade access.
    5. A coated, filmed, or plastic surface turns hazy, is scratched, or has its coating peeling after cleaning: stop using that product on that surface, record it, and ask the maker or the installer for instructions.
    6. The fog or spots are inside an insulating glass unit or behind the glass of a mirror: this is not wiping work; report to the building technician for assessment by a glazing contractor.
    7. Spray has entered the eyes and they still sting after being washed with plenty of water, or dizziness, coughing, or shortness of breath develops while working in a confined room: go out into fresh air, call a doctor or the emergency services, and bring the label or the data sheet.
    8. The skin of the hands is repeatedly dry, red, itchy, or cracked: report to the supervisor and refer the person to the occupational health service.

    Common misinterpretations

    Guess what’s wrong first, then open the explanation.

    Common misconception

    The more cleaner, the cleaner the glass.

    Why is it wrong?

    Material that does not evaporate stays on the glass. More liquid and a stronger solution mean more residue, so the streaks increase.

    Common misconception

    Glass cleaner is only colored water, so it needs no label.

    Why is it wrong?

    This product contains a glycol ether solvent, and other products can contain ammonia. A container with no label is not used, and its contents are never mixed with chlorine bleach.

    Common misconception

    A mirror that is black at the edges has not been cleaned well enough.

    Why is it wrong?

    That black color is in the layers behind the glass. Wiping harder or using a stronger product does not repair it.

    Common misconception

    All glass can be cleaned in the same way.

    Why is it wrong?

    Films, anti-fog coatings, acrylic, and glass whose coating can be touched follow their makers’ instructions, and abrasive tools are not used.

    Common misconception

    Microfiber cloths can be laundered with any other cloth.

    Why is it wrong?

    Microfiber can be damaged by high pH and is not compatible with chlorine-based products, so it is laundered separately from cloths that have been used with bleach.

    Chapter 26 on reading safety data sheets for cleaning products gives the way of reading the document used here, and Chapter 21 on surfactants, colloids, and emulsions explains wetting and contact angle. Glass as part of the building is in Chapter 50 · Buildings & Facilities on building glass and windows. The neighboring product groups are in Chapter 27 on neutral all-purpose cleaners and Chapter 30 on acid bathroom cleaners.

    Exercises and worked solutions

    The figures in the questions are for practice, with the same reading of the ratio as in the examples.

    Try to answer first, then open the worked solution.

    1. A 750 mL bottle is filled at a rate of one part of product plus eight parts of water. What are the volumes of product and water?

      Check my answer
      See the worked solution

      There are nine parts in total, so the volume of product is 750/9=83.3750/9 = 83.3 mL and that of water is 750−83.3=666.7750 - 83.3 = 666.7 mL. The water goes in first, and the bottle is labeled so that the next person does not have to guess the rate.

    2. An attendant doubles the rate of product so that the streaks on a glass door will disappear. Why do the streaks increase?

      Check my answer
      See the worked solution

      Doubling the rate doubles the fraction of nonvolatile material in the solution, so the residue per square meter doubles with it. The streaks decrease with a solution at the stated rate, less liquid, and a cloth that is clean and not yet saturated.

    3. The bottom edge of a bathroom mirror has blackened to a width of two fingers. What does the attendant do, and who takes over?

      Check my answer
      See the worked solution

      The attendant does not wipe it harder, because that black color is in the layers behind the glass. The mirror is recorded and reported to the building technician, and its replacement is carried out by a glazing contractor.

    4. A refrigerated storeroom at 8 °C and a box truck that reaches 55 °C at midday are proposed as storage places. How are they judged against the storage temperature of 10 to 50 °C?

      Check my answer
      See the worked solution

      Both are outside the range in the data sheet: 8 °C is below the lower limit of 10 °C, and 55 °C is above the upper limit of 50 °C. The product is stored in a room whose temperature is within that range, away from heat and sunlight.

    5. Microfiber cloths for glass are laundered together with mop cloths that have been used with chlorine bleach. What is the problem?

      Check my answer
      See the worked solution

      Microfiber can be damaged by high pH and is not compatible with chlorine-based products, so the cloths can be damaged and no longer work as they should. Glass cloths are laundered separately and not together with cloths that have been used with bleach.

    6. An attendant wants to add a little bleach to the glass cleaner bottle so that it will kill germs at the same time. What is the answer?

      Check my answer
      See the worked solution

      The answer is no. Cleaning substances are never mixed, and bleach that meets ammonia or acid gives off harmful gases. Surface disinfection is a separate task with its own product and its own contact time, as covered in Chapter 4 · Biology & Microbiology on disinfectants and how they work.

    References

    External sources

    • Safer Chemical Ingredients Listepa.gov
    • OpenStax: Chemistry 2eopenstax.org
    • Glycol Ethersepa.gov
    • Preservation Brief 33: The Preservation and Repair of Historic Stained and Leaded Glassnps.gov
    • Environmental Cleaning Procedurescdc.gov
    • Cleaning Supplies and Equipmentcdc.gov
    • UFGS-08 81 00 Glazingwbdg.org
    • Safe use of cleaning substances in the hospitality industryhse.gov.uk
    • Peraturan Menteri Kesehatan Nomor 5 Tahun 2026 tentang Perbekalan Kesehatanjdih.kemkes.go.id

    Revision history

    DateVersionChange
    November 15, 20261First published

    How to cite

    Kurnia (2026). Glass and mirror cleaners: glycol ethers and surfactants, evaporation and streaks, cloths and tools, coated surfaces, and handling and storage. ARSTEMA Academy. Revised November 15, 2026. arstema.com/en/academy/konsep/pembersih-kaca-dan-cermin-glikol-eter-dan-surfaktan-penguapan-dan-bekas-garis-kain-dan-alat-permukaan-berlapis-serta-penanganan-dan-penyimpanan

    Self-check · 3 questions

    Check your understanding before moving on

    Write your answer in your own words, then compare it with the worked solution from this chapter’s exercises. The system doesn’t judge open answers as right or wrong; you decide which parts you’ve understood.

    0/3rated
    1

    A 750 mL bottle is filled at a rate of one part of product plus eight parts of water. What are the volumes of product and water?

    2

    An attendant doubles the rate of product so that the streaks on a glass door will disappear. Why do the streaks increase?

    3

    The bottom edge of a bathroom mirror has blackened to a width of two fingers. What does the attendant do, and who takes over?

    Self-assessment progress0%

    Nearby chapters