Skip to content

Search ARSTEMA

Type a chapter, term, symptom, or tool.

    Commercial Kitchens · Chapter 7Applied

    By Kurnia · Published November 14, 2026 · Version 1 · 19 min read

    Motorized kitchen equipment

    planetary mixers, slicing machines, meat mincers, and blenders, guards and interlocks, safe cleaning, and work limits

    In a hotel banquet kitchen, a cook cleans a meat slicing machine whose plug is still in the socket and whose blade guard has not been refitted, a planetary mixer keeps turning when its bowl guard is opened, and the pusher of the meat mincer is missing, so meat is pushed in with fingers. This chapter covers motorized kitchen machines from the building technician’s side: the arrangement and hazards of planetary mixers, slicing machines, meat mincers, and blenders, blade edge speed, rotational energy and run-down time, agitator torque, fixed guards, interlocks, and pushers according to the HSE order of control measures and Permenaker 38/2016, controls, emergency stops, and electrical matters, cleaning after isolation and refitting guards, pre-use checks, training, and old machines. Bypassing, altering, or repairing guards and interlocks, dismantling blades, gears, and motors beyond the user instructions, and any electrical work are the work of authorized supplier technicians and authorized electricians.

    High-risk material

    This material involves real hazards. A concept explanation doesn’t replace site procedures, competency, energy isolation, the latest SDS, or a work permit.

    Section you’re reading: Chapter opening

    Close to midnight, after a banquet for five hundred guests, a hotel banquet kitchen is being cleaned in a hurry. A cook wipes the blade of a meat slicing machine with the switch in the off position, but the plug is still in the socket and the blade ring guard lies in the sink. At the next table, a 20-liter planetary mixer keeps turning when its bowl guard is lifted, and a trainee scrapes dough off the hook with a spatula. The pusher of the meat mincer has been missing since morning, so meat is pushed into the feed throat with fingers. The technician on duty, called because the mixer “sounds rough,” finds three situations that can each cut or crush a hand, and needs to know which ones they can check and which ones must be handed over.

    Scope

    This chapter covers motorized kitchen machines in hotel, restaurant, and hospital kitchens, namely planetary mixers, meat and vegetable slicing machines, meat mincers, and blenders and food processors, from the building technician’s side: arrangement and hazards, speed and energy, guards and interlocks, controls and electrical matters, safe cleaning, and inspection. The Indonesian regulation discussed is Permenaker (Minister of Manpower Regulation) 38/2016 on K3 (occupational safety and health) for power and production equipment. UK HSE guidance is used for comparison and is written as guidance of that country.

    Mechatronics, door locks, sensors, and interlocks of laundry and kitchen machines are covered in Chapter 15 · Mechanical & Mechatronics, risk assessment and the performance level of interlocks in Chapter 70 · Electrical & Control on functional safety of machinery, and energy isolation, LOTO, and work permits in Chapter 76 · Electrical & Control on safe work. Single-phase motors are in Chapter 42 · Electrical & Control, motor selection and load torque in Chapter 43 · Electrical & Control, motor protection in Chapter 47 · Electrical & Control, belts and chains in Chapter 6 · Mechanical & Mechatronics, RCDs in Chapter 22 · Electrical & Control, kitchen sanitation in Chapter 7 · Biology & Microbiology, and electrical inspection of portable appliances in Chapter 114 · Electrical & Control on inspection of portable electrical appliances in hotels.

    Work outside the building technician’s authority: bypassing, altering, adjusting, or repairing guards, interlocks, safety switches, brakes, and emergency stops, dismantling blades, feed screws, gears, or motors beyond the steps written in the user instructions, sharpening slicer blades where the manufacturer specifies sharpening by a technician, and any electrical work on cords, switches, and motors. All of that belongs to authorized supplier technicians and authorized electricians. The building technician checks guards and interlock function according to the user instructions, makes sure machines are isolated before cleaning, tags damaged machines, keeps records, and reports.

    Four machines and their hazards

    A planetary mixer is a mixer whose agitator, that is, the hook, beater, or whisk, turns on its own shaft while traveling around the inside of a stationary bowl. The bowl is raised to the working position with a lever, and the bowl guard covers the top of the bowl while the machine runs. The hazard is a hand or arm trapped and twisted between the agitator and the bowl wall.

    A slicing machine cuts meat, cheese, or vegetables with a rotating circular blade. The blade ring guard covers the blade edge outside the cutting zone, a carriage carrying the food moves back and forth past the blade, and the end-piece holder holds the last piece so that fingers do not approach the blade. The hazard is cuts and severed fingers, both while slicing and while cleaning the blade.

    A meat mincer pushes meat with a feed screw into a rotating knife and a perforated plate. Meat enters through a hopper and the feed throat, and a pusher is used to press the meat onto the screw. Blenders and food processors use small, very high-speed blades at the bottom of the container, with a lid that is locked before the motor can turn.

    HSE groups machinery hazards as follows: parts of the body can be hit by moving parts, drawn into or trapped between rollers, belts, and pulley drives, cut or severed by sharp edges, and crushed between parts moving together. The four machines in this chapter have all of these hazards, with different weights: slicers and blenders mainly cut, mixers trap and twist, and mincers draw in and then cut.

    From an analysis of accidents in the UK food and drink industries, HSE records mincing, grinding, and mixing machines at about 4 percent each of the machinery accidents investigated, food mixers at 3 percent, and slicers at 2 percent. Those are data from UK food processing, not hotel kitchens, but they show that all four types of machine appear in accident records. For catering businesses, HSE writes that most machinery accidents are caused by incorrect cleaning and reassembly of slicing machines and poor maintenance of guards.

    Blade edge speed, rotational energy, and torque

    Dangerous parts move faster than they appear to. The edge speed of a circular blade is calculated from its diameter and speed:

    v=π d n60v = \frac{\pi\,d\,n}{60}

    where vv is edge speed (m/s), dd is blade diameter (m), and nn is rotational speed (rpm). In a time tt, the blade edge travels s=v ts = v\,t. That distance is compared with human reaction time: in the time needed to pull a hand back, the blade edge has already traveled more than one meter (Example 1).

    A blade that has been switched off still stores rotational energy:

    E=12Iω2,I=12mr2,ω=2πn60E = \tfrac{1}{2} I \omega^2, \qquad I = \tfrac{1}{2} m r^2, \qquad \omega = \frac{2\pi n}{60}

    where EE is rotational kinetic energy (J), II is moment of inertia (kg·m²), ω\omega is angular speed (rad/s), mm is blade mass (kg), and rr is blade radius (m). This formula for II is for a thin, flat solid disc, so it is only an estimate for a blade with a thick hub. If the speed falls steadily to a stop over a time tht_h, the number of revolutions during run-down is N=n th/120N = n\,t_h/120. Permenaker 38/2016 requires machines that keep turning or moving after their power source is cut to be fitted with an effective locking device or brake that can work automatically.

    A mixer agitator moves slowly, but its force is large. Torque on the agitator shaft is calculated from power and speed:

    T=PωT = \frac{P}{\omega}

    where TT is torque (N·m), PP is output power at the shaft (W), and ω\omega is the angular speed of the shaft (rad/s). The formula gives an upper bound, because gear losses are ignored, and the force at a distance rr from the shaft is F=T/rF = T/r (Example 3). A force that large can seriously injure a hand trapped between the hook and the bowl, and the motor does not stop just because a hand is in its way.

    Guards, interlocks, and pushers

    HSE sets an order of measures for preventing people from reaching dangerous parts. First, a fixed guard, a guard secured with screws or nuts and bolts so that a tool is needed to remove it, encloses the dangerous parts whenever practicable. Second, if fixed guards are not practicable, the guard is interlocked so that the machine cannot start before the guard is closed and the guard cannot be opened while the machine is still moving. Third, where guards cannot give full protection, jigs, holders, and push sticks are used. Finally, the remaining risk is controlled with information, instruction, training, supervision, and protective equipment.

    An interlock is an arrangement of switches or locks that links the position of a guard to the machine control, so that the machine stops or cannot start when the guard is open (Chapter 15 · Mechanical & Mechatronics). On a planetary mixer, the interlock reads the position of the bowl guard and on some machines also the position of the bowl; on blenders and food processors, the interlock reads the container lid. The design quality of an interlock, for example coded switches and fault monitoring, is assessed by the methods in Chapter 70 · Electrical & Control.

    Permenaker 38/2016 states that power and production equipment must be fitted with safety devices, that all moving and dangerous parts must be fitted with protective devices, and that protective devices must be able to protect against incorrect operation, prevent approach to the dangerous zone during operation, and work automatically. The regulation also prohibits safety devices or protective devices on a running machine from being removed, altered, or used for other purposes, requires the point of operation to be given a transparent protective device if that point must be visible, and requires dangerous machines to be fed mechanically or with a safe feeding device. The mincer pusher and the slicer end-piece holder are such feeding devices.

    Guards that are often removed, damaged, or defeated can indicate guards that make work difficult. HSE asks employers to find out why workers do this and to deal with the causes, because safeguards that are easily overridden encourage workers to take risks. For the building technician, a missing guard or an interlock that does not stop the machine is a finding that takes the machine out of use, tagged and handed over, not repaired with wire or tape.

    Controls, emergency stops, and electrical matters

    Permenaker 38/2016 requires power and production equipment to be fitted with start and stop buttons whose markings are uniform across the workplace, and requires its electrical equipment to comply with electrical regulations and to be grounded. HSE asks for control switches to be clearly marked, emergency stops to be provided within easy reach where necessary, and start buttons and pedals to be shrouded so they are not pressed accidentally. A good kitchen machine also does not start by itself when power returns after an outage, so that a person wiping the blade is not surprised by a machine that suddenly turns; this behavior is checked in the user instructions.

    A kitchen machine motor draws current according to its nameplate. For a three-phase motor:

    I=P3 VL η cos⁡φI = \frac{P}{\sqrt{3}\,V_L\,\eta\,\cos\varphi}

    where II is current per phase (A), PP is the motor output power on the nameplate (W), VLV_L is line-to-line voltage (V), η\eta is efficiency, and cos⁡φ\cos\varphi is power factor. The result is compared with the nameplate current and the motor protection setting chosen by an authorized electrician (Chapter 47 · Electrical & Control). An overload relay that trips often on a mixer can indicate dough that is too heavy for the selected speed, worn bearings or gears, or a belt problem (Chapter 6 · Mechanical & Mechatronics), and is not a reason to raise its setting.

    HSE’s catering information sheet records the recommendation of the UK engineering institution that portable equipment in kitchens be given a formal visual inspection and tested every 12 months because the kitchen environment is more demanding. Those are UK figures; the hotel’s schedule is set with an authorized electrician (Chapter 114 · Electrical & Control on inspection of portable electrical appliances in hotels). Cleaning water sprayed onto the motor housing, a cord trapped under the machine, and a cracked plug are daily findings that are reported.

    Safe cleaning

    Permenaker 38/2016 requires lubrication and cleaning of power and production equipment to be done while it is not operating. HSE is more detailed: the machine is properly switched off, isolated, or locked off before any action to remove blockages, clean, or adjust it. A switch in the off position is not enough, because a switch can be bumped, can fail, or can be switched on by someone else. Isolation means disconnecting the machine from its power source in a way that can be seen, for example by unplugging it and placing the plug where the person cleaning can see it, or by locking the isolator according to the LOTO procedure in Chapter 76 · Electrical & Control.

    The cleaning sequence is written in a worksheet for each machine according to the user instructions. The principle is the same for all four machines:

    1. Switch off, isolate, and wait until the blade, screw, or agitator has completely stopped; do not slow the blade with a hand or a cloth.
    2. Remove only the parts that the user instructions allow the user to remove, with the tools provided by the manufacturer if any, and with cut-resistant gloves when handling a stationary blade.
    3. Wash the removed parts in the sink, and wipe the machine body; the motor housing and switches are not hosed or sprayed with water (Chapter 7 · Biology & Microbiology for cleaning agents).
    4. Refit all guards before the plug is reconnected or the isolator is opened.
    5. Check the guards and interlocks before the machine is used again.

    Steps 4 and 5 are the core of the opening case. HSE asks for guards to be periodically inspected and maintained, replaced after cleaning and maintenance, and checked before use. A slicing machine used without its blade ring guard because the guard was left in the sink is the situation that guidance names as the cause of most machinery accidents in catering.

    Blockages in a mincer or food processor are also cleared after isolation. Meat jammed in the feed throat is not pushed with fingers, and a blender lid is not opened before the blade stops. Cut-resistant gloves protect against the edge of a stationary blade, but not against a powered blade or screw. HSE warns that loose clothing, jewelry, and loose long hair can get caught in moving parts, and gloves can get caught in the same way.

    Pre-use checks, training, and old machines

    Permenaker 38/2016 requires machines to be checked by the operator before operation, running machines to be always supervised by the operator, and the operator not to leave the workplace while the machine is operating. Pre-use checks in the kitchen include: guards fitted and intact, the interlock stopping the machine or preventing it from starting when the guard is opened, using the test method in the user instructions, pusher and end-piece holder available, the machine stable in its place, cord and plug intact, and no unusual noise or smell. The interlock test is done by opening the guard, not by putting a hand or an object into the dangerous zone.

    HSE asks that unauthorized, unqualified, or untrained people not use machinery, that children never be allowed to operate or help at machines, and that new and young workers be given instruction, training, and supervision. For catering businesses, HSE asks employers who employ children to consider prohibiting the use of machinery such as food slicers. A list of the names of people allowed to use and clean each machine is posted next to that machine.

    Old machines often lack the guards or interlocks that new machines have. HSE writes that old food machines made before the European standard for their type must still be suitable, maintained, and safe to clean and use, and that the standard for new machines is used as a benchmark: the risk gap is assessed, the safeguarding is upgraded if reasonably practicable, and if not, the machine is replaced within a reasonable time. HSE also names European standards for slicing machines, vegetable cutting machines, food processors and blenders, planetary mixers, and mincing machines as design references.

    Permenaker 38/2016 applies to power and production equipment, which covers prime movers, machine tools and production machines, mechanical power transmission, and furnaces. As of November 2026, JDIH Kemnaker (the ministry’s legal documentation and information network) records that regulation as in force.

    Permenaker 11/2026 revokes several articles of Permenaker 38/2016 on specialist labor inspectors, without touching the articles used in this chapter. Whether hotel kitchen machines count as objects of periodic examination and testing by an Ahli K3 (occupational safety and health expert) under that regulation cannot be confirmed; management asks the labor inspector.

    Worked example

    The numbers in the examples below are practice numbers unless their origin is stated.

    Example 1: slicer blade edge speed. A blade with a diameter of 0.30 m turns at 280 rpm. Its edge speed is v=π×0.30×280/60=4.40v = \pi \times 0.30 \times 280/60 = 4.40 m/s. In 0.25 s, which this example uses as a person’s reaction time, the blade edge travels s=4.40×0.25=1.10s = 4.40 \times 0.25 = 1.10 m, more than one circumference of the blade. A finger approaching the edge cannot be pulled back in time, and that is why the ring guard and end-piece holder are used.

    Example 2: a blade still turning after switch-off. The slicer blade in Example 1 has a mass of 1.6 kg and a radius of 0.15 m, so I=0.5×1.6×0.152=0.018I = 0.5 \times 1.6 \times 0.15^2 = 0.018 kg·m². Its angular speed is ω=2π×280/60=29.32\omega = 2\pi \times 280/60 = 29.32 rad/s, and its rotational energy is E=0.5×0.018×29.322=7.74E = 0.5 \times 0.018 \times 29.32^2 = 7.74 J. If a blade without a brake stops in 10 s, during that time it still turns N=280×10/120=23.3N = 280 \times 10/120 = 23.3 times. That is why the blade is not wiped before it is completely still.

    Example 3: mixer agitator torque. A mixer motor delivers 0.75 kW to an agitator shaft turning at 100 rpm. Its angular speed is ω=2π×100/60=10.47\omega = 2\pi \times 100/60 = 10.47 rad/s, so the upper bound for torque is T=750/10.47=71.6T = 750/10.47 = 71.6 N·m. At 0.12 m from the shaft, the hook force is F=71.6/0.12=597F = 71.6/0.12 = 597 N, equivalent to the weight of about 61 kg. A spatula or hand entering the bowl while the hook turns meets that force.

    Example 4: blender blade tip speed. A blender blade with a diameter of 0.10 m turns at 18,000 rpm. Its tip speed is v=π×0.10×18,000/60=94.2v = \pi \times 0.10 \times 18{,}000/60 = 94.2 m/s, more than 20 times the edge speed of the slicer blade in Example 1. A blade that fast keeps turning for a few moments after the button is released, so the lid and container are lifted after the blade stops, and the lid interlock is not bypassed.

    Example 5: mincer time and energy. A mincer with a capacity of 120 kg/h is asked to mince 18 kg of meat. The time is 18/120=0.1518/120 = 0.15 hours, which is 0.15×60=90.15 \times 60 = 9 minutes, and the 1.1 kW motor uses at most 1.1×0.15=0.1651.1 \times 0.15 = 0.165 kWh. Throughout those 9 minutes meat is fed continuously, so without a pusher the cook’s hand is repeatedly above the feed throat. The work is postponed until a pusher is available.

    Example 6: mixer motor current from the nameplate. The mixer motor nameplate states 1.5 kW, 400 V three-phase, efficiency 0.82, and power factor 0.80. The current is I=1,500/(3×400×0.82×0.80)=3.30I = 1{,}500/(\sqrt{3} \times 400 \times 0.82 \times 0.80) = 3.30 A per phase. If an overload relay set close to that current trips often, the cause is sought in the load and the mechanical parts, and the building technician does not raise the relay setting.

    Stop conditions

    1. The blade ring guard, bowl guard, lid, end-piece holder, or pusher is missing, cracked, loose, or has not been refitted after cleaning: do not use the machine; isolate it, attach a defect tag, and report to the kitchen supervisor and the supplier technician.
    2. The machine can run with the guard, lid, or bowl open, or does not stop when the guard is opened: stop and isolate it, attach a defect tag, do not bypass the interlock, and hand it over to the authorized supplier technician.
    3. The blade, screw, or agitator keeps turning much longer than usual after switch-off, the brake does not work, or the machine starts by itself: isolate it, attach a defect tag, and hand it over to the supplier technician.
    4. Cleaning or clearing a blockage would put a hand near the blade, screw, or agitator while the machine has not been isolated or has not stopped: stop the work until the machine is isolated and still.
    5. There is a burning smell, the motor housing is hot, a cord or plug is damaged, the RCD or overload relay trips repeatedly, or someone feels tingling: do not restore the circuit repeatedly; hand it over to an authorized electrician.
    6. An untrained person, an unsupervised trainee, or a child has been asked to use or clean a slicing machine, mincer, or mixer: stop it and report to the kitchen supervisor.
    7. Someone has been cut, trapped, or drawn in by a machine: press the stop button, isolate the machine, give first aid and call emergency services if needed, and stop using the machine until the supplier technician has examined it.

    Common misinterpretations

    Guess what’s wrong first, then open the explanation.

    Common misconception

    The switch is off, so it is safe to clean the blade.

    Why is it wrong?

    A switch can be bumped or switched on by someone else. The machine is isolated by unplugging it or locking the isolator, and then left until the rotating parts are still.

    Common misconception

    Without the guard, the blade is easier to clean and the machine is quicker to use.

    Why is it wrong?

    HSE catering guidance points to incorrect reassembly of slicers and poorly maintained guards as the cause of most machinery accidents. Guards are refitted before the machine is reconnected.

    Common misconception

    If the motor cannot be heard, the blade has stopped.

    Why is it wrong?

    A slowly turning blade is almost silent, and Example 2 shows that a blade without a brake still turns dozens of times after switch-off. The blade is watched until it is still.

    Common misconception

    Cut-resistant gloves make a hand safe near a turning blade.

    Why is it wrong?

    Those gloves are for handling a stationary blade. Against powered parts, gloves are not strong enough and can be drawn in.

    Common misconception

    An old machine has been used for years without an accident, so it is safe.

    Why is it wrong?

    HSE asks for old machines to be compared with the standard for new machines and for their safeguarding to be upgraded or the machine replaced. The absence of accidents so far is not proof that the guarding is adequate.

    Chapter 15 · Mechanical & Mechatronics on mechatronics of laundry and kitchen machines explains how interlocks and sensors work, Chapter 70 · Electrical & Control on functional safety of machinery explains how to assess their quality, and Chapter 76 · Electrical & Control on safe work explains the isolation and LOTO used during cleaning. Motors and their protection are in Chapter 42 · Electrical & Control, Chapter 43 · Electrical & Control, and Chapter 47 · Electrical & Control, and pressurized kitchen equipment is covered in Chapter 6 on commercial espresso machines.

    Exercises and worked solutions

    The numbers in the exercises are for practice.

    Try to answer first, then open the worked solution.

    1. A slicer blade with a diameter of 0.25 m turns at 300 rpm. Calculate its edge speed and the distance the blade edge travels in 0.2 s.

      Check my answer
      See the worked solution

      The edge speed is π×0.25×300/60=3.93\pi \times 0.25 \times 300/60 = 3.93 m/s, and in 0.2 s the blade edge travels 3.93×0.2=0.793.93 \times 0.2 = 0.79 m. A distance that long in a time that short shows that protection depends on the guard and end-piece holder, not on a person’s reaction speed.

    2. A cook cleans a slicing machine with the switch in the off position, but the plug is still in the socket. What is wrong, and how should it be done?

      Check my answer
      See the worked solution

      A switch that is off can be bumped or switched on by someone else, and HSE asks for machines to be isolated or locked off before cleaning. The plug is pulled and placed where the person cleaning can see it, the blade is left until it is still, and the guard is refitted before the plug is reconnected.

    3. While inspecting a planetary mixer, the technician finds that the mixer keeps turning when the bowl guard is lifted. What does the technician do?

      Check my answer
      See the worked solution

      An interlock that does not stop the machine means the protective device is not working automatically as Permenaker 38/2016 requires, so a hand can enter the bowl while the hook turns. The technician stops and isolates the mixer, attaches a defect tag, records the finding, and hands it over to the supplier technician without trying to repair or bypass the switch.

    4. The meat mincer pusher is broken, and the cook says they will use their fingers carefully because orders are piling up. What does the technician answer?

      Check my answer
      See the worked solution

      Permenaker 38/2016 requires dangerous machines to be fed mechanically or with a safe feeding device, and HSE places pushers as protection where a fixed guard cannot fully enclose. The work is postponed until a replacement pusher from the supplier is available, because fingers in the feed throat can be drawn in by the screw.

    5. A blender blade with a diameter of 0.08 m turns at 15,000 rpm. Calculate its tip speed, and explain why the lid is not opened before the blade stops.

      Check my answer
      See the worked solution

      The tip speed is π×0.08×15,000/60=62.8\pi \times 0.08 \times 15{,}000/60 = 62.8 m/s. A blade that fast keeps turning briefly after the button is released, so a lid opened too soon opens a path for a hand to the blade and sprays out the container contents; the lid interlock is there to prevent that.

    6. The hotel has an old slicing machine without an end-piece holder and with a blade ring guard that no longer fits. A manager asks whether the machine may stay in use. What does the technician answer?

      Check my answer
      See the worked solution

      HSE asks for old machines to be compared with the standard for new machines of their type: the safeguarding is upgraded if reasonably practicable, and if not, the machine is replaced within a reasonable time. As long as its guard does not fit and the end-piece holder is missing, the machine is taken out of use and tagged, and the supplier technician is asked to assess whether suitable parts are still available.

    References

    External sources

    • Providing and using work equipment safely: A brief guide (INDG291)hse.gov.uk
    • Maintenance priorities in catering (Catering Information Sheet No 12)hse.gov.uk
    • Food processing machineryhse.gov.uk
    • Peraturan Menteri Ketenagakerjaan Nomor 38 Tahun 2016 tentang Keselamatan dan Kesehatan Kerja Pesawat Tenaga dan Produksijdih.kemnaker.go.id
    • Peraturan Menteri Ketenagakerjaan Nomor 38 Tahun 2016jdih.kemnaker.go.id
    • Peraturan Menteri Ketenagakerjaan Nomor 11 Tahun 2026 tentang Tata Cara Pengawasan Ketenagakerjaanjdih.kemnaker.go.id
    • Frequently asked questions (Catering and hospitality)hse.gov.uk

    Revision history

    DateVersionChange
    November 14, 20261First published

    How to cite

    Kurnia (2026). Motorized kitchen equipment: planetary mixers, slicing machines, meat mincers, and blenders, guards and interlocks, safe cleaning, and work limits. ARSTEMA Academy. Revised November 14, 2026. arstema.com/en/academy/konsep/peralatan-dapur-bermotor-mixer-planetari-mesin-pengiris-penggiling-daging-dan-blender-pelindung-dan-interlock-pembersihan-yang-aman-serta-batas-pekerjaan

    Self-check · 3 questions

    Check your understanding before moving on

    Write your answer in your own words, then compare it with the worked solution from this chapter’s exercises. The system doesn’t judge open answers as right or wrong; you decide which parts you’ve understood.

    0/3rated

    Safety limits still apply. This quiz tests reasoning; it doesn’t authorize mixing, adjusting, dismantling, live measurement, or field action.

    1

    A slicer blade with a diameter of 0.25 m turns at 300 rpm. Calculate its edge speed and the distance the blade edge travels in 0.2 s.

    2

    A cook cleans a slicing machine with the switch in the off position, but the plug is still in the socket. What is wrong, and how should it be done?

    3

    While inspecting a planetary mixer, the technician finds that the mixer keeps turning when the bowl guard is lifted. What does the technician do?

    Self-assessment progress0%

    Nearby chapters